Specifications: SVDA-1
Here is a S-Video Distribution Amplifier designed with your Budget in mind. For
a lot less money, you get a quality 4-Output Y/C Distribution Amplifier that is small
enough to be put virtually anywhere. No cluttered Desktops or expensive Rack Frames to
buy.
For your Character Generator, VTR or Non-Linear Editor with only ONE S-Video output, the
SVDA-1 offers a simple solution to gain those extra monitor points or VTR feeds. If your
need requires making multiple SVHS Dubs of a finished project you can keep the Video in
its component form without ever going to an inherently noisy NTSC (Composite) signal. The
SVDA-1 provides a simple solution to simple problems at a very reasonable price.
Specifications
INPUT: 4-pin mini Din (SVHS)
Y-channel 1Vp-p terminated
C-channel .8Vp-p terminated
OUTPUT: Four 4-pin mini Din
Y-channel 1Vp-p *
C-channel .8Vp-p *
Impedance 75 ohms
Noise > 60dB below 1Vp-p
Frequency Resp. DC - 10Mhz +/-.3dB
Y/C delay < 2ns
GAIN:* -4.5dB to +3dB both Y & C
.6V p-p to 1.4V p-p Y-channel
.45V p-p to 1.05Vp-p C-channel
POWER: 12VDC (18VDC Max) @ 200ma Max.
Wall Transformer supplied
DIMENSION: 4"W x 5"L x 7/8"H
MADE IN USA